For the very best plumbing solutions

Registered in

You are here: Homepage » Plumbing Services » Leak Detection » Running Water

Running Water

The constant noise of flowing water can certainly drive one crazy. Much more than a lightweight irritation, flowing water along with elevated water costs and a spinning water meter imply a dripping source in and around your residence. Survey you property for running water issues to save on water and money.

Following the sound to its origin may help you confront the leaking source. Unfortunately not all water leaks are easily located just from tracking down the sound of running water. In plenty of circumstances you will have to summon plumber Philadelphia for leak detection.

Following the sound of running water to a plumbing fixture, it will probably be the toilet. Running toilets leak out gallons of water and increase water bills by as much as $500. Even though any type of repair should be left to plumber Philadelphia, do-it-your-self buffs may resort to the following directions to mend small lavatory leaks.

To Mend a Running Toilet:
Pull up tank lid. If the tank is empty and not filling after flushing the toilet, most likely the flapper is stuck open. Rearrange the flapper. If the toilet continues to flush and water is running over the overflow tube - use your hand to pull up the float. Level the float so the tank stops filling as water levels reach an inch or 2.5 cm beneath the top of the overflow tube. Check for leaks using the dye test. Place a few drops of color dye in the tank. If after half an hour colored water appears in the bowl without flushing, water is leaking from the toilet tank. This kind of toilet leak is usually caused by a worn flapper. Install a new flapper to stop the toilet leak.

Leaking Slabs
The ongoing noise of running water additionally implies the occurrence of leaking slabs - concealed water leaks that develop in underground sewer or water lines. With the exception of high water costs, slab leaks deplete lots of water and millions of dollars in structural damage. Poor piping installation, inferior products, high water pressure, electrolysis or rusty pipes may all lead to leaking slabs in the residence.

Slab Leak Clues
The following warning flags indicate the presence of a slab leak:

More plumbing experts in other cities: